Black & Gold Anodised Aluminium
Temperered Glass
Silver & Gold Anodised Aluminium
Temperered Glass
Finish
Weight: 0.9kg
Size and Weight
20x7 dot-matrix LED display.
Display
Power button
Short press to power on / display off
Long press to standby
Menu button
Press to settings / return
Enter button
Press to confirm / mute
Rotating Dial
Rotate to control volume / settings
Front and Rear
Intel®
Altera®
Cyclone® FPGA
Chip
1 x USB
1 x Optical
1 x Coaxial
1 x I2S
Digital Inputs
USB
PCM: 44.1kHz - 768kHz
DSD: DSD64 - DSD256
Optical
PCM: 44.1kHz - 192kHz
DSD: DSD64 via DoP only
Coaxial
PCM: 44.1kHz - 192kHz
DSD: DSD64 via DoP only
I2S
PCM: 44.1kHz - 768kHz
DSD: DSD64 - DSD256
Supported Formats
(Input dependent)
Supports native DSD 1-bit processing and an integrated sampling rate converter, giving users full control over PCM and DSD playback behavior.
Resampling Options
-
PCM: 1x, 2x, 4x, 8x, 16x (up to 768 kHz / 705.6 kHz)
-
DSD: DSD64, DSD128, DSD256, DSD512 (Only available in DSD native mode)
*Note: In DSD Native mode, a brief popping sound may occur when switching between PCM/DSD or DSD tracks with different rates. For mixed sampling rate playback, DSD Multibit mode is recommended.
Digital Playback Control
1 x XLR, approx. 4 Vrms, 82 Ω
1 x RCA, approx. 2 Vrms, 41 Ω
Preamp Outputs
1 x Balanced 4.4 mm jack, approx. 11 Vrms, 5.1 Ω
1 x Single Ended 6.35 mm jack, approx. 5.5 Vrms, 2.6 Ω
Headphone Outputs
Selectable headphone output gain
-
LOW
-
MED
-
HIGH
Gain
≤ 1100mW (Balanced 4.4 mm)
≤ 290mW (Single Ended 6.35 mm)
Output Power
20Hz – 80kHz, ± 3 dB
Frequency
Response
0.0045% (Preamp)
0.008% (Headphone amplifier)
THD+N
≤ -100dB (Preamp Balanced)
≤ -100dB (Preamp Single Ended)
≤ -100dB (Headphone Balanced)
≤ -60dB (Headphone Single Ended)
Crosstalk
≥ 120dB (Preamp Balanced)
≥ 110dB (Preamp Single Ended)
≥ 110dB (Headphone Balanced)
≥ 100dB (Headphone Single Ended)
Signal to Noise
Ratio (SNR)
≤ 25µVrms (Preamp Balanced)
≤ 72mVrms (Preamp Single Ended)
≤ 30µVrms (Headphone Balanced)
≤ 65µVrms (Headphone Single Ended)
Noise
Sleek & Compact design
LAiV R2R ladder network architecture
Native DSD 1-bit conversion
NOS / SRC Mode
Sampling rate converter
Positive / negative phase
Display brightness, delay dim, and delay off
8 x I2S Mode with LAiV product auto-configured
I2S clock supported
Discrete output buffered preamplifier.
Discrete headphone amplifier with gain selector
Headphone output protections
Features
Front panel
Remote control
Controls
15VDC / 2A, DC 5.5/2.5 mm female.
Power
Welcome card with Quick Start guide
Crescendo VERSE
Remote control
Power adapter with interchangeable plugs
In the Box
24-month limited warranty.
Warranty
-
Colours vary by configuration and manufacturing process.
-
Size and weight vary by configuration and manufacturing process.
-
The specification was evaluated using an Audio Precision APx Analyzer under PCM192kHz with 1kHz, A-weighted, USB input, balanced XLR preamp output, headphone output high gain into 32 Ω at maximum volume, A-weighted conditions.
-
Check out our warranty policy for more details.